The Part Guy - Chevy Corvette Air Conditioning Evaporator Units & Parts

Home, About, Contact, Terms CONTACT US PRICES AND AVAILABILITY OF USED & REFURBISHED PARTS ARE SUBJECT TO CHANGE AT ANY TIME Connect with us on:
CORVETTE A/C Evaporator Units & Parts JUMP MENU EVAPORATOR UNITS - 63-65, 66, 67, 68-72, 73-early 77, Mid-77-82 EVAPORATOR UNIT PARTS - 63-67, 68-72, 73-early 77, Mid-77-82 All control heads come ready to install; fully rebuilt, calibrated and bench tested to function like new, including all vacuum selector switch, master switch and fan switch functions! CLICK ON IMAGES FOR LARGER & ADDITIONAL VIEWS! PLEASE NOTE - ALL PHOTOS ARE STOCK PHOTOS - NOT THE ACTUAL AVAILABLE PART!

1963-65 Corvette A/C Evaporator Unit UNITS
RESTORATION ON ALL 1963-65 UNITS INCLUDES: (unless otherwise noted) NEW evaporator. NEW replacement expansion valve. (Not NCRS) Bead-blast & paint the evaporator housing. NEW blower motor. Blower wheel, blower motor vent tube & mount. NEW Resistor. NEW Drain tube & clamp NOTE - The STV (Suction Throttling Valve) IS NOT INCLUDED and rarely availble separately. If you have an original, in most cases we can rebuild it.

WANT US TO CUSTOM REBUILD YOUR EVAPORATOR UNIT? $999 labor + s/h. Includes new evaporator, blower motor, replacement expansion valve, drain-hose and POA Eliminator/Upgrade Valve* * Any additional parts & fibergalass repairs, if needed, are additional. NOTE - Cannot replace metal shroud on the rear of the unit, but may be able to repair with fiberglass. UPRADES - $125 to upgrade to BILLET POA ELIMINATOR/UPGRADE VALVE. WE DO NOT CURRENTLY OFFER SERVICES ON THE ORIGINAL POA VALVES, THOUGH WE MAY BE ABLE TO TEST, FLUSH & CALIBRATE YOUR ORIGINAL FOR R12 OR 134a IF IT TESTS OUR FOUR PRE-TESTS.

1963-67 Corvette A/C Evaporator Unit PARTS

BLOWER WHEEL 1963-68 Chevy Corvette $29.99 Used (Steel - 2 3/4" deep, for single slot blower motor shafts) (GM # 3144683)	BLOWER MOTOR 1963-76 Chevy Corvette $49.99 New
BLOWER WHEEL SPACER 1963-67 Corvette w/Plastic Blower Wheel & Half-moon Blower Motor Shaft (GM Part # 3004686) $14.99 USED

1968-72 Corvette A/C Evaporator UNITS PLEASE NOTE - All units are built to order and typically take 1-3 weeks from the time a pre-paid order is placed.
RESTORATION ON ALL 1968-72 UNITS INCLUDES: (unless otherwise noted) NEW evaporator! Reconditioned & zinc plated POA valve that can be pre-adjusted to work with R12 OR 134a. Reconditioned & zinc plated expansion valve. Restored finish on inner and outer evaporator housing! Blower motor vent tube & mount. Resistor. Reconditioned/bench tested blower motor & blower wheel. (ADD NEW FOR ADDITIONAL $35.00!) POA, expansion valve & evaporator clamps. Cleaned & tested sensor. NEW Drain tube & clamp
*EXTREMELY LIMITED AVAILABILITY* 1968 Corvette. $975 w/STOCK POA Valve plus s/h. $899.99 w/STANDARD POA Eliminator Valve (134a) $975 w/BILLET POA Eliminator/Upgrade Valve (R12 or 134a) CLICK ON IMAGES FOR LARGER & ADDITIONAL VIEWS!
*EMAIL FOR AVAILABILITY* 1969-72 Corvette. $875 w/BILLET POA Eliminator Valve (R12 or 134a) CLICK ON IMAGES FOR LARGER & ADDITIONAL VIEWS!
1969-72 Corvette. $799.99 w/STANDARD POA Eliminator Valve (134a) CLICK ON IMAGES FOR LARGER & ADDITIONAL VIEWS!
WANT US TO CUSTOM REBUILD YOUR EVAPORATOR UNIT? $699 labor + s/h. Includes new evaporator, blower motor, expansion valve, drain-hose and POA Eliminator/Upgrade Valve* * Any additional parts & fibergalass repairs, if needed, are additional. NOTE - Cannot replace metal shroud on the rear of the unit, but may be able to repair with fiberglass. UPRADES - $125 to upgrade to BILLET POA ELIMINATOR/UPGRADE VALVE. WE DO NOT CURRENTLY OFFER SERVICES ON THE ORIGINAL POA VALVES.
1968-72 Corvette A/C Evaporator Unit PARTS
DRAIN HOSE - New 1968-82 Chevy Corvette $29.99 New	EXPANSION VALVE BULT CLAMP 1968-72 Chevy Corvette $9.99 Used
BLOWER MOTOR 1967-76 Chevy Corvette $49.99 New	EXPANSION VALVE 1968-72 Chevy Corvette $99.99 Reconditioned
EVAPORATOR 1968 Chevy Corvette $299.99 NEW	EVAPORATOR 1969-72 Chevy Corvette $299.99 NEW
BLOWER MOTOR VENT TUBE 1968-E77 Chevrolet Corvette $79.99	BLOWER MOTOR VENT TUBE Late 77-82 Chevrolet Corvette $79.99
BLOWER WHEEL 1963-68 Chevy Corvette $29.99 Used (Steel - 2 3/4" deep, for single slot blower motor shafts) (GM # 3144683)	BLOWER WHEEL 1969-76 Chevy Corvette $29.99 Used (Plastic - 2 3/4" deep, for dual slot blower motor shafts)
EVAPORATOR HOUSING SUPPORT BRACKET $75 BEAD-BLASTED/ZINC PLATED	BLOWER MOTOR VENT TUBE CONNECTOR 1968-82 Chevrolet Corvette $9.99
BLOWER WHEEL SPACER 1968-82 Corvette w/Plastic Blower Wheel & Half-moon Blower Motor Shaft (GM Part # 3004686) $14.99 USED	BLOWER WHEEL SPACER 1968-82 Corvette w/Plastic Blower Wheel & Double-Slotted Blower Motor Shaft $14.99 USED
AMBIENT SENSOR SWITCH - Good Original 1968-76 Chevy Corvette (Fiber Base) $95.00 Original/Tested	AMBIENT SENSOR SWITCH - Good Original 1968-76 Chevy Corvette (Tin Base) $95.00 Original/Tested
EXPANSION VALVE to EVAPORATOR HOUSING CLAMP 1963-72 Chevy Corvette $14.99	POA VALVE CLAMP 1968-72 Chevy Corvette $14.99
EVAPORATOR SUCTIONT TUBE to HOUSING HOUSING CLAMP 1963-72 Chevy Corvette $14.99
BLOWER RESISTOR - Good Original 1968 Chevrolet Corvette $19.99 NEW	BLOWER RESISTOR - Good Original 1969-82 Chevy Corvette $35 NEW
1973-early 77 Corvette A/C Evaporator UNITS PLEASE NOTE - All units are built to order and typically take 1-3 weeks from the time a pre-paid order is placed.
RESTORATION ON ALL 1973-early 77 UNITS INCLUDES: (unless otherwise noted) NEW Evaporator Rebuilt VIR (Valves-In-Receiver) with installed POA & expansion valves and gold zinc-plated upper & lower parts Restored finish on inner and outer evaporator housing Blower motor vent tube & mount Resistor Reconditioned/bench tested blower motor & blower wheel All clamps Ambient sensor switch (Some 76 models do not use this switch)
EMAIL FOR AVAILABILITY 1973-early 77 Corvette. $799.99 plus s/h. CLICK ON IMAGES FOR LARGER & ADDITIONAL VIEWS!
WANT US TO CUSTOM REBUILD YOUR EVAPORATOR UNIT? $699 labor + s/h. * Includes new evaporator, blower motor, & drain-hose. We will also rebuild your VIR or replace your VIR with a VIR Eliminator (if you plan to use 134a) * Parts & fibergalass repairs, if needed, are additional. NOTE - Cannot replace metal shroud on the rear of the unit, but may be able to repair with fiberglass.
1973-early 77 Corvette A/C Evaporator Unit PARTS
EVAPORATOR 1973-early 77 Chevy* Corvette * For cars equipped with a VIR. Mid 77 & newer use an accumulator. $325 NEW
AMBIENT SENSOR SWITCH - Good Original 1968-76 Chevy Corvette (Fiber Base) $95.00 Original/Tested	AMBIENT SENSOR SWITCH - Good Original 1968-76 Chevy Corvette (Tin Base) $95.00 Original/Tested
BLOWER MOTOR 1967-76 Chevy Corvette $49.99 NEW	BLOWER MOTOR VENT TUBE CONNECTOR 1968-82 Chevrolet Corvette $19.99 USED
BLOWER MOTOR VENT TUBE 1968-E77 Chevrolet Corvette $79.99 USED	BLOWER MOTOR VENT TUBE Late 77-82 Chevrolet Corvette $79.99 USED
BLOWER RESISTOR - Good Original 1969-82 Chevy Corvette $35 NEW	DRAIN HOSE - New 1968-82 Chevy Corvette $29.99 New
BLOWER WHEEL - METAL 1969-76 Chevy Corvette $29.99 USED (METAL - 2 3/4" deep, for single slot blower motor shafts) (GM # 3144683)	BLOWER WHEEL - PLASTIC 1969-76 Chevy Corvette $29.99 USED (Plastic - 2 3/4" deep, for dual slot blower motor shafts)
VIR CLAMP $25 BEAD-BLASTED/ZINC PLATED	EVAPORATOR HOUSING SUPPORT BRACKET $75 BEAD-BLASTED/ZINC PLATED
1977-82 Corvette A/C Evaporator UNITS PLEASE NOTE - All units are built to order and typically take 1-3 weeks from the time a pre-paid order is placed.
*EMAIL FOR AVAILABILITY* 1977-mid-79 Corvette. $549.99, plus s/h. CLICK ON IMAGES FOR LARGER & ADDITIONAL VIEWS!	EMAIL FOR AVAILABILITY Mid-79-82 Corvette. $549.99, plus s/h. CLICK ON IMAGES FOR LARGER & ADDITIONAL VIEWS!
WANT US TO CUSTOM REBUILD YOUR EVAPORATOR UNIT? $450 labor + s/h. * Includes new evaporator, blower motor, accumulator & drain-hose. * Parts & fibergalass repairs, if needed, are additional. NOTE - Cannot replace metal shroud on the rear of the unit, but may be able to repair with fiberglass.
*1977-82 Corvette A/C Evaporator Unit* *PARTS*
EVAPORATOR Mid 1977*-79 Chevy* Corvette (Replaces 15-673/3036433) * For 1977 models equipped with an accumulator. * For 1979 models that do not have ports on the suction fitting. $299.99 NEW	EVAPORATOR 1980-82 Chevy Corvette (Replaces 15-673/3036433) For 1980 models that have 2 ports on the suction fitting. $245 NEW NOTE - THIS CAN ALSO BE USED AS AND INEXPENSIVE REPLACEMENT FOR 77-79 MODELS.
BLOWER MOTOR VENT TUBE CONNECTOR 1968-82 Chevrolet Corvette $19.99 Used	BLOWER MOTOR VENT TUBE Late 77-82 Chevrolet Corvette $79.99 Used
BLOWER MOTOR w/BLOWER WHEEL Late 77-82 Chevrolet Corvette $75 NEW
BLOWER RESISTOR - Good Original 1969-82 Chevy Corvette $35 NEW	DRAIN HOSE - New 1968-82 Chevy Corvette $29.99 New
ACCUMULATOR to EVAPORATOR CLAMP Late 1977-82 Chevy Corvette $11.99 NEW	ACCUMULATOR to EVAPORATOR CLAMP Late 1977-79 Chevy Corvette (w/Port) EXC. EARLY 77 w/VIR $69.99 NEW

ALL USED, REBUILT & RECONDITIONED PRODUCTS HAVE LIMITED AVAILABILITY &
NOT ALL PRODUCTS PICTURED ARE AVAILABLE
ALL INVENTORY IS SUBJECT TO AVAILABILITY & PRICES ARE SUBJECT TO CHANGE AT ANY TIME.

Questions or Stock Requests NO PHONE CONTACT AVAILABLE BY EMAIL ONLY OR EMAIL THEPARTG@THEPARTGUY.COM	Ordering Information NO PHONE CONTACT AVAILABLE BY EMAIL ONLY OR EMAIL THEPARTG@THEPARTGUY.COM
Post a picture of your car!	American made, whenever possible!

WE BUY FACTORY A/C PARTS FOR MORE INFO