Home,
About,
Contact,
Terms
CONTACT US
|
CHEVY IMPALA, CAPRICE, BELAIR & BISCAYNE
JUMP MENU:
CHEVY FULL-SIZE EVAPORATOR UNITS - 1962-64,
1965-M66,
Late 1966, 1967-68,
1969-70, 1971-73
|
1962-64
Impala, Belair & Biscayne
|
|
|
|
|
|
![](images/PartsForSale/EVAPORATOR_HOUSING_63-64Impala12-02-20%20(1)_small1.JPG)
1963-64 Impala
Evaporator Case HOUSING |
![](images/PartsForSale/EVAPORATOR_UNIT_BRACKET_63-64ImpalaUPPERSuctionFittingSupportBracket%20(1)_small.JPG) ![](images/PartsForSale/EVAPORATOR_UNIT_BRACKET_63-64ImpalaUPPERSuctionFittingSupportBracket%20(2)_small.JPG)
1963 Impala
Upper Suction Tube/STV Support
Bracket |
![](images/PartsForSale/EVAPORATOR_UNIT_BRACKET_63-64ImpalaLOWERSuctionFittingSupportBracket%20(2)_small.JPG) ![](images/PartsForSale/EVAPORATOR_UNIT_BRACKET_63-64ImpalaLOWERSuctionFittingSupportBracket%20(1)_small.JPG)
1963 Impala
Lower Suction Tube/STV Support Bracket |
|
|
|
|
|
|
![](images/PartsForSale/BLOWER_ASSY_63ImpalaAC(HousingONLY)09-11-23%20(1)_small.JPG)
1963 Impala
A/C Blower Housing |
PHOTO
COMING
SOON
1964 Impala
A/C Blower Housing
Type-1 (Single-Opening) |
PHOTO
COMING
SOON
1964 Impala
A/C Blower Housing
Type-2 (Double-Opening) |
|
|
![](images/PartsForSale/BLOWER_MOTOR_VENT_TUBE_64-67GM%20(2)_small.JPG) ![](images/PartsForSale/BLOWER_MOTOR_VENT_TUBE_64-67GM%20(1)_small.JPG)
1963-64 Impala
A/C Blower Motor Vent Tube
$100 USED
WHEN AVAILABLE |
|
|
|
1965-Mid 66
Impala, Caprice, Belair & Biscayne
|
RESTORATION ON ALL 1965-Mid 66 UNITS INCLUDES:
(unless otherwise noted)
-
Evaporator has been thoroughly flushed clean and
pressure tested with refrigerant and 250 pounds of nitrogen pressure!
-
Rebuilt/zinc plated/bench tested POA valve that can
be pre-adjusted to work with R12 OR 134a.
-
Reconditioned/bench tested/zinc plated expansion
valve.
-
Inner and outer evaporator housing! (painted black)
-
Blower motor vent tube & mount.
-
Resistor.
-
Reconditioned blower motor & blower wheel.
(CAN ALSO INSTALL A NEW BLOWER MOTOR FOR AN
ADDITIONAL $35.00!)
-
Expansion valve & evaporator clamps.
-
Rebuilt Suction Throttling Valve (STV)
-
Cleaned & tested sensor.
-
Drain tube & clamp.
|
CLICK ON IMAGES FOR LARGER &
ADDITIONAL VIEWS!
![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_65Impala(OrigEvapSTVwithBadVacMotorNewMotor)09-04-20%20(1)_small.JPG) ![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_65Impala(OrigEvapSTVwithBadVacMotorNewMotor)09-04-20%20(2)_small.JPG) ![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_65Impala(OrigEvapSTVwithBadVacMotorNewMotor)09-04-20%20(3)_small.JPG) ![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_65Impala(OrigEvapSTVwithBadVacMotorNewMotor)09-04-20%20(4)_small.JPG)
![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_65Impala(OrigEvapSTVwithBadVacMotorNewMotor)09-04-20%20(5)_small.JPG) ![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_65Impala(OrigEvapSTVwithBadVacMotorNewMotor)09-04-20%20(6)_small.JPG) ![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_65Impala(OrigEvapSTVwithBadVacMotorNewMotor)09-04-20%20(7)_small.JPG) ![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_65Impala(OrigEvapSTVwithBadVacMotorNewMotor)09-04-20%20(8)_small.JPG)
$750, plus s/h.
EMAIL FOR AVAILABILITY |
WANT US TO CUSTOM REBUILD YOUR EVAPORATOR UNIT?
$699.99 labor + s/h. Includes new evaporator,
blower motor, expansion valve, drain-hose and
rebuild (exc. actuator) of STV Suction
Throttling Valve***
*** Parts &
fibergalass repairs, if needed, are additional.
DEDUCT $150 IF YOU WOULD LIKE YOUR ORIGINAL
EVAPORATOR FLUSHED & TESTED. (EVAPORATOR
WILL NOT BE WARRANTIED.)
|
![](images/PartsForSale/ACandHeating/ACBoxes/IMG_8619_small.JPG) ![](images/PartsForSale/ACandHeating/ACBoxes/IMG_8618_small.JPG)
BLOWER MOTOR VENT TUBE
1965-72 Chevrolet Full-Size
$49.99
|
![](images/PartsForSale/ACandHeating/ACBoxes/VENT_TUBE_MOUNT_GM-FBody(3013475)_small.jpg)
BLOWER MOTOR VENT TUBE CONNECTOR
1965-72 Chevrolet Full-Size
$9.99
|
![](images/PartsForSale/ACandHeating/ACBoxes/GMDrainHose_WM_small.jpg) ![](images/PartsForSale/ACandHeating/ACBoxes/DRAIN_HOSE_GMEvaporatorUnit(2)_small.JPG)
DRAIN HOSE - New
1965-72 Chevrolet Full-Size
$29.99
|
![](images/PartsForSale/ACandHeating/Valves/VALVES_POA_ELIMINATOR_15-51_small.JPG)
15-51 POA VALVE ELIMINATOR KIT
1966 Impala, Caprice, Belair &
Biscayne
$125.00
NEW
|
![](images/PartsForSale/ACandHeating/ACBoxes/GMBlowerMotor_small.jpg)
BLOWER MOTOR - New
1962-72 Chevrolet Full-Size
$49.99
|
![](images/PartsForSale/ACandHeating/ACBoxes/BLOWER_WHEEL_Plastic_275inch(double-flat)_small.jpg)
BLOWER WHEEL - PLASTIC
1962-72 Chevrolet Full-Size
$29.99
USED
(Plastic - 2 3/4" deep, for dual slot blower motor
shafts) |
![](images/PartsForSale/ACandHeating/ACBoxes/BLOWER_WHEEL_GMMetal_small.jpg)
BLOWER WHEEL - METAL
1962-72 Chevrolet Full-Size
$29.99 USED
(METAL - 2 3/4" deep, for single slot blower motor
shafts)
(GM # 3144683) |
![](images/PartsForSale/ACandHeating/Switches/AC%20SWITCHES_%20RESISTOR_67-68F-Body68Nova68Corvette65-68Impala%20GM3883843_NEW%20(1)_small.JPG) ![](images/PartsForSale/ACandHeating/VentsandDucts/AC%20SWITCHES_%20RESISTOR_67-68F-Body68Nova68Corvette65-68Impala%20GM3883843_NEW%20(3)_small.JPG) ![](images/PartsForSale/ACandHeating/VentsandDucts/AC%20SWITCHES_%20RESISTOR_67-68F-Body68Nova68Corvette65-68Impala%20GM3883843_NEW%20(2)_small.JPG)
A/C BLOWER RESISTOR
1965-68
Chevrolet Impala, Caprice, Belair & Biscayne
$19.99
NEW |
![](images/PartsForSale/ACandHeating/ACBoxes/SQUIRREL_CAGE_SPACER_Half-MoonCut_WM_small.jpg)
BLOWER WHEEL SPACER
w/Plastic Blower Wheel & Half-moon Blower Motor Shaft
(GM Part # 3004686)
$14.99
USED |
![](images/PartsForSale/ACandHeating/ACBoxes/SQUIRREL_CAGE_SPACER_SquareCut_WM_small.jpg)
BLOWER WHEEL SPACER
w/Plastic Blower Wheel & Double-Slotted Blower Motor Shaft
$14.99
USED |
|
|
Late 1966 Impala, Caprice, Belair & Biscaynene
RESTORATION ON ALL 1966 UNITS INCLUDES:
(unless otherwise noted)
-
Evaporator thoroughly flushed clean and pressure tested
with refrigerant and 250 pounds of nitrogen pressure!
-
Rebuilt/zinc plated/bench tested POA valve that can
be pre-adjusted to work with R12
OR 134a.
-
Reconditioned/bench tested/zinc plated expansion
valve.
-
Reconditioned/tested ambient sensor switch.
-
Restored show-quality finish on inner and outer
evaporator housing!
-
Blower motor vent tube & mount.
-
Reconditioned/bench tested blower motor & blower wheel.
-
POA, expansion valve & evaporator clamps.
-
Drain tube & clamp.
|
![](images/PartsForSale/AC_BOX_66-67Impala(NEWEvapMtrExpMtr134aPOAElim)12-31-23%20(1).JPG)
![](images/PartsForSale/AC_BOX_66-67Impala(NEWEvapMtrExpMtr134aPOAElim)12-31-23%20(9)_small.JPG) ![](images/PartsForSale/AC_BOX_66-67Impala(NEWEvapMtrExpMtr134aPOAElim)12-31-23%20(2)_small.JPG) ![](images/PartsForSale/AC_BOX_66-67Impala(NEWEvapMtrExpMtr134aPOAElim)12-31-23%20(3)_small.JPG)
![](images/PartsForSale/AC_BOX_66-67Impala(NEWEvapMtrExpMtr134aPOAElim)12-31-23%20(4)_small.JPG) ![](images/PartsForSale/AC_BOX_66-67Impala(NEWEvapMtrExpMtr134aPOAElim)12-31-23%20(6)_small.JPG) ![](images/PartsForSale/AC_BOX_66-67Impala(NEWEvapMtrExpMtr134aPOAElim)12-31-23%20(7)_small.JPG)
$750 plus s/h.
WITH STANDARD POA ELIMINATOR
$875 plus s/h. WITH BILLET POA ELIMINATOR
EMAIL FOR AVAILABILITY
|
WANT US TO CUSTOM REBUILD YOUR EVAPORATOR UNIT?
$699.99 labor + s/h.
Includes new evaporator,
blower motor, expansion valve, drain-hose and
POA Eliminator Valve***
*** Parts &
fibergalass repairs, if needed, are additional.
UPRADES - $125 to
upgrade to BILLET POA ELIMINATOR/UPGRADE VALVE.
In most cases, we can also recondition your
original Frigidaire expansion valve in place of
the new replacement.
DEDUCT $150 IF YOU WOULD LIKE YOUR ORIGINAL
EVAPORATOR FLUSHED & TESTED. (EVAPORATOR
WILL NOT BE WARRANTIED.)
|
1967-68 Impala, Caprice, Belair & Biscayne
RESTORATION ON ALL 1967-68 UNITS INCLUDES:
(unless otherwise noted)
-
Evaporator thoroughly flushed clean and pressure tested
with refrigerant and 250 pounds of nitrogen pressure!
-
Rebuilt/zinc plated/bench tested POA valve that can
be pre-adjusted to work with (R12
OR 134a), Standard 134a POA ELiminator Valve OR
Billet R12/134a POA Eliminator Valve. (PRICE VARIES)
-
Reconditioned/bench tested/zinc plated expansion
valve.
-
Reconditioned/tested ambient sensor switch. (1968 only)
-
Restored show-quality finish on inner and outer
evaporator housing!
-
Blower motor vent tube & mount.
-
Reconditioned/bench tested blower motor & blower wheel.
-
POA, expansion valve & evaporator clamps.
-
Drain tube & clamp.
|
CLICK ON IMAGES FOR LARGER &
ADDITIONAL VIEWS!
1967
![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_67Impala(NewEvap-ExpMtr134aPOAElim)02-18-21%20(1).JPG)
![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_67Impala(NewEvap-ExpMtr134aPOAElim)02-18-21%20(7)_small.JPG) ![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_67Impala(NewEvap-ExpMtr134aPOAElim)02-18-21%20(2)_small.JPG) ![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_67Impala(NewEvap-ExpMtr134aPOAElim)02-18-21%20(3)_small.JPG)
![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_67Impala(NewEvap-ExpMtr134aPOAElim)02-18-21%20(4)_small.JPG) ![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_67Impala(NewEvap-ExpMtr134aPOAElim)02-18-21%20(5)_small.JPG) ![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_67Impala(NewEvap-ExpMtr134aPOAElim)02-18-21%20(6)_small.JPG)
$750 plus s/h.
WITH STANDARD POA ELIMINATOR
$875 plus s/h. WITH BILLET POA ELIMINATOR
EMAIL FOR AVAILABILITY |
1968
![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_68Impala(NewEvap-ExpMtr134aPOAElim)04-09-21%20(1).JPG)
![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_68Impala(NewEvap-ExpMtr134aPOAElim)04-09-21%20(6)_small.JPG) ![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_68Impala(NewEvap-ExpMtr134aPOAElim)04-09-21%20(2)_small.JPG) ![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_68Impala(NewEvap-ExpMtr134aPOAElim)04-09-21%20(3)_small.JPG)
![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_68Impala(NewEvap-ExpMtr134aPOAElim)04-09-21%20(4)_small.JPG) ![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_68Impala(NewEvap-ExpMtr134aPOAElim)04-09-21%20(5)_small.JPG) ![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_68Impala(NewEvap-ExpMtr134aPOAElim)04-09-21%20(7)_small.JPG)
$750 plus s/h.
WITH STANDARD POA ELIMINATOR
$875 plus s/h. WITH BILLET POA ELIMINATOR
EMAIL FOR AVAILABILITY |
WANT US TO CUSTOM REBUILD YOUR EVAPORATOR UNIT?
$699.99 labor + s/h.
Includes new evaporator,
blower motor, expansion valve, drain-hose and
POA Eliminator Valve***
*** Parts &
fibergalass repairs, if needed, are additional.
UPRADES - $125 to
upgrade to BILLET POA ELIMINATOR/UPGRADE VALVE.
In most cases, we can also recondition your
original Frigidaire expansion valve in place of
the new replacement.
DEDUCT $150 IF YOU WOULD LIKE YOUR ORIGINAL
EVAPORATOR FLUSHED & TESTED. (EVAPORATOR
WILL NOT BE WARRANTIED.)
|
![](images/PartsForSale/EVAPORATORS_65-67Impala10-6162_06-22%20(3)_small.JPG) ![](images/PartsForSale/EVAPORATORS_65-67Impala10-6162_06-22%20(1)_small.JPG) ![](images/PartsForSale/EVAPORATORS_65-67Impala10-6162_06-22%20(2)_small.JPG)
![](images/PartsForSale/EVAPORATORS%20-%2065-67ImpalaINSTALLED%20(1)_small.JPG) ![](images/PartsForSale/EVAPORATORS%20-%2065-67ImpalaINSTALLED%20(2)_small.JPG)
EVAPORATOR
1966-67
Impala, Caprice, Belair & Biscayne
$325
NEW
|
![](images/PartsForSale/EVAPORATORS%20-%2068-70Impala_small.jpg)
![](images/PartsForSale/EVAPORATORS%20-%2068-70ImpalaINSTALLED%20(2)_small.JPG) EVAPORATOR
1964-73
Impala, Caprice, Belair & Biscayne
$325
NEW
|
![](http://www.thepartguy.com/images/PartsForSale/ACandHeating/Valves/15-205_small.jpg)
EXPANSION VALVE
1964-73 Impala,
Caprice, Belair & Biscayne
$42 NEW
Functions the same as the original, but cosmetically
different. Capillary tubes are longer than
original and the original clamp to evaporator
housing will not fit properly.
|
![](images/PartsForSale/ACandHeating/ACBoxes/VALVES_EXPANSION_67-74GMFrigidaireRECOND04-14-single_small.jpg)
EXPANSION VALVE
1967-73 Impala, Caprice,
Belair & Biscayne
$115 RECONDITIONED
|
![](images/PartsForSale/ACandHeating/ACBoxes/GM-ExpansionValveBulbCalmps_WM_small1.jpg)
EXPANSION VALVE BULT CLAMP
1964-73 Impala, Caprice,
Belair & Biscayne
$9.99
USED |
![](images/PartsForSale/ACandHeating/ACBoxes/CLAMP_ExpansionValve_small.jpg)
EXPANSION VALVE to
EVAPORATOR
HOUSING CLAMP
1965-73 Impala, Caprice,
Belair & Biscayne
$9.99
BEAD-BLASTED/PAINTED
|
![](images/PartsForSale/ACandHeating/Valves/VALVES_POA_ELIMINATOR_15-52_small.JPG)
15-52 POA VALVE ELIMINATOR KIT
1967-73
Impala, Caprice, Belair & Biscayne
$125.00
NEW
|
![](images/PartsForSale/ACandHeating/Valves/15-51POAValveReconditioned_WM_small.jpg)
RECONDITIONED POA
VALVES
CLICK HERE TO GOT TO OUR
VALVES PAGE
|
|
![](images/PartsForSale/ACandHeating/ACBoxes/15-404_small.jpg)
Refrigerant "Cork"
Tape
Used to insulate
the expansion valve sensing bulb.
$8.99 (12" Strip)
NEW |
![](images/PartsForSale/ACandHeating/ACBoxes/GMDrainHose_WM_small.jpg) ![](images/PartsForSale/ACandHeating/ACBoxes/DRAIN_HOSE_GMEvaporatorUnit(2)_small.JPG)
DRAIN HOSE
1968-73 Impala, Caprice,
Biscayne & Belair
(Replaces Part #
3149483 & 2465813)
$29.99
NEW
|
![](images/PartsForSale/ACandHeating/ACBoxes/SWITCHES_AMBIENT-SENSOR_COWL-MOUNTED(Fiber)_GM_WM_small.jpg)
AMBIENT SENSOR SWITCH (Fiber Body)
1968-73 Impala, Caprice,
Belair & Biscayne
(GM # 3917359)
$75.00
RECONDITIONED
|
![](images/PartsForSale/ACandHeating/ACBoxes/SWITCHES_AMBIENT-SENSOR_COWL-MOUNTED(Tin)_GM_small.jpg)
AMBIENT SENSOR SWITCH (Tin Body)
1968-73 Impala, Caprice,
Belair & Biscayne
(GM # 483326)
$75.00
RECONDITIONED
|
![](images/PartsForSale/ACandHeating/ACBoxes/04-200_small.jpg)
BLOWER MOTOR
1964-73 Impala, Caprice,
Belair & Biscayne
(Replaces Part # 4914906)
$49.99
NEW
|
![](images/PartsForSale/ACandHeating/ACBoxes/IMG_8619_small.JPG) ![](images/PartsForSale/ACandHeating/ACBoxes/IMG_8618_small.JPG)
BLOWER MOTOR VENT TUBE
1965-72 Chevrolet Full-Size
$49.99
|
![](images/PartsForSale/ACandHeating/ACBoxes/BLOWER_WHEEL_GMMetal_small.jpg)
BLOWER WHEEL
1963-70 Impala, Caprice,
Belair & Biscayne
$29.99
BEAD-BLASTED/PAINTED
(METAL - 2 3/4" deep,
for single slot blower motor shafts)
(GM #
3144683)
|
![](images/PartsForSale/ACandHeating/ACBoxes/BLOWER_WHEEL_Plastic_275inch(double-flat)_small.jpg)
BLOWER WHEEL
1963-70
Impala, Caprice, Belair & Biscayne
$29.99
USED
(Plastic - 2 3/4" deep, for dual slot
blower motor shafts) |
![](images/PartsForSale/ACandHeating/ACBoxes/SQUIRREL_CAGE_SPACER_Half-MoonCut_WM_small.jpg)
BLOWER WHEEL
SPACER
w/Plastic Blower Wheel & Half-moon Blower Motor
Shaft
(GM Part #
3004686)
$14.99
USED |
![](images/PartsForSale/ACandHeating/ACBoxes/SQUIRREL_CAGE_SPACER_SquareCut_WM_small.jpg)
BLOWER WHEEL SPACER
w/Plastic Blower Wheel & Double-Slotted Blower Motor
Shaft
$14.99
USED |
![](images/PartsForSale/ACandHeating/ACBoxes/VENT_TUBE_MOUNT_68-72GMType-1_WM_small.jpg)
BLOWER MOTOR VENT TUBE CONNECTOR
(Type-1 - Fits 3/4" opening in housing.)
1965-73 Impala, Caprice,
Belair & Biscayne
$14.99
USED
|
![](images/PartsForSale/ACandHeating/ACBoxes/VENT_TUBE_MOUNT_68-72GMBlockStyle(3018945)_WM_small.jpg)
BLOWER MOTOR VENT TUBE CONNECTOR
(Type-2 - Block-Style - Fits 1" opening in housing)
1965-73 Impala, Caprice,
Belair & Biscayne
$19.99
USED
|
![](images/PartsForSale/ACandHeating/Switches/AC%20SWITCHES_%20RESISTOR_67-68F-Body68Nova68Corvette65-68Impala%20GM3883843_NEW%20(1)_small.JPG) ![](images/PartsForSale/ACandHeating/VentsandDucts/AC%20SWITCHES_%20RESISTOR_67-68F-Body68Nova68Corvette65-68Impala%20GM3883843_NEW%20(3)_small.JPG) ![](images/PartsForSale/ACandHeating/VentsandDucts/AC%20SWITCHES_%20RESISTOR_67-68F-Body68Nova68Corvette65-68Impala%20GM3883843_NEW%20(2)_small.JPG)
A/C BLOWER RESISTOR
1965-68
Chevrolet Impala, Caprice, Belair & Biscayne
$19.99
NEW |
|
|
|
![](images/PartsForSale/ACandHeating/ACBoxes/CLAMP_ExpansionValve_small.jpg)
EXPANSION VALVE to
EVAPORATOR
HOUSING CLAMP
1968-72 GTO, LeMans &
Tempest
$9.99
BEAD-BLASTED/PAINTED
|
|
1969-70 Impala, Caprice, Belair & Biscayne
RESTORATION ON ALL 1969-70 UNITS INCLUDES:
(unless otherwise noted)
-
Evaporator thoroughly flushed clean and pressure tested
with refrigerant and 250 pounds of nitrogen pressure!
-
Rebuilt/zinc plated/bench tested POA valve that can
be pre-adjusted to work with (R12
OR 134a), Standard 134a POA ELiminator Valve OR
Billet R12/134a POA Eliminator Valve. (PRICE VARIES)
-
Reconditioned/bench tested/zinc plated expansion
valve.
-
Reconditioned/tested ambient sensor switch.
-
Restored show-quality finish on inner and outer
evaporator housing!
-
Blower motor vent tube & mount.
-
Reconditioned/bench tested blower motor & blower wheel.
-
POA, expansion valve & evaporator clamps.
-
Drain tube & clamp.
|
CLICK ON IMAGES FOR LARGER &
ADDITIONAL VIEWS!
![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_69-70Impala(NewEvap-Mtr-Exp-134aPOAElimPOA)09-1-20%20(1).JPG)
![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_69-70Impala(NewEvap-Mtr-Exp-134aPOAElimPOA)09-1-20%20(6)_small.JPG) ![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_69-70Impala(NewEvap-Mtr-Exp-134aPOAElimPOA)09-1-20%20(2)_small.JPG) ![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_69-70Impala(NewEvap-Mtr-Exp-134aPOAElimPOA)09-1-20%20(3)_small.JPG) ![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_69-70Impala(NewEvap-Mtr-Exp-134aPOAElimPOA)09-1-20%20(4)_small.JPG)
![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_69-70Impala(NewEvap-Mtr-Exp-134aPOAElimPOA)09-1-20%20(5)_small.JPG) ![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_69-70Impala(NewEvap-Mtr-Exp-134aPOAElimPOA)09-1-20%20(7)_small.JPG) ![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_69-70Impala(NewEvap-Mtr-Exp-134aPOAElimPOA)09-1-20%20(8)_small.JPG)
$750 plus s/h.
WITH STANDARD POA ELIMINATOR
$875 plus s/h. WITH BILLET POA ELIMINATOR
EMAIL FOR AVAILABILITY
|
WANT US TO CUSTOM REBUILD YOUR EVAPORATOR UNIT?
$725 labor + s/h.
Includes new evaporator,
blower motor, expansion valve, drain-hose and
POA Eliminator Valve***
*** Parts &
fibergalass repairs, if needed, are additional.
UPRADES - $125 to
upgrade to BILLET POA ELIMINATOR/UPGRADE VALVE.
In most cases, we can also recondition your
original Frigidaire expansion valve in place of
the new replacement.
DEDUCT $150 IF YOU WOULD LIKE YOUR ORIGINAL
EVAPORATOR FLUSHED & TESTED. (EVAPORATOR
WILL NOT BE WARRANTIED.)
|
1971-73 Impala, Caprice, Belair & Biscayne
RESTORATION ON ALL 1971-73 UNITS INCLUDES:
(unless otherwise noted)
-
Evaporator thoroughly flushed clean and pressure tested
with refrigerant and 250 pounds of nitrogen pressure!
-
Rebuilt/zinc plated/bench tested POA valve that can
be pre-adjusted to work with (R12
OR 134a), Standard 134a POA ELiminator Valve OR
Billet R12/134a POA Eliminator Valve. (PRICE VARIES)
-
Reconditioned/bench tested/zinc plated expansion
valve.
-
Reconditioned/tested ambient sensor switch.
-
Restored show-quality finish on inner and outer
evaporator housing!
-
Blower motor vent tube & mount.
-
Reconditioned/bench tested blower motor & blower wheel.
-
POA, expansion valve & evaporator clamps.
-
Drain tube & clamp.
|
CLICK ON IMAGES FOR LARGER &
ADDITIONAL VIEWS!
![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_71-73Impala(RecondEvap_NewMotor-Resistor-Exp-134aPOAElim)04-21%20(1).JPG)
![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_71-73Impala(RecondEvap_NewMotor-Resistor-Exp-134aPOAElim)04-21%20(6)_small.JPG) ![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_71-73Impala(RecondEvap_NewMotor-Resistor-Exp-134aPOAElim)04-21%20(2)_small.JPG) ![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_71-73Impala(RecondEvap_NewMotor-Resistor-Exp-134aPOAElim)04-21%20(3)_small.JPG) ![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_71-73Impala(RecondEvap_NewMotor-Resistor-Exp-134aPOAElim)04-21%20(4)_small.JPG)
![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_71-73Impala(RecondEvap_NewMotor-Resistor-Exp-134aPOAElim)04-21%20(5)_small.JPG) ![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_71-73Impala(RecondEvap_NewMotor-Resistor-Exp-134aPOAElim)04-21%20(7)_small.JPG) ![](images/PartsForSale/ACandHeating/ACBoxes/AC_BOX_71-73Impala(RecondEvap_NewMotor-Resistor-Exp-134aPOAElim)04-21%20(8)_small.JPG)
$750 plus s/h.
WITH STANDARD POA ELIMINATOR
$875 plus s/h. WITH BILLET POA ELIMINATOR
EMAIL FOR AVAILABILITY
|
WANT US TO CUSTOM REBUILD YOUR EVAPORATOR UNIT?
$725 labor + s/h.
Includes new evaporator,
blower motor, expansion valve, drain-hose and
POA Eliminator Valve***
*** Parts &
fibergalass repairs, if needed, are additional.
UPRADES - $85 to
upgrade to BILLET POA ELIMINATOR/UPGRADE VALVE.
In most cases, we can also recondition your
original Frigidaire expansion valve in place of
the new replacement.
DEDUCT $150 IF YOU WOULD LIKE YOUR ORIGINAL
EVAPORATOR FLUSHED & TESTED. (EVAPORATOR
WILL NOT BE WARRANTIED.)
|
PICTURE
COMING SOON BLOWER MOTOR VENT TUBE
1965-72 Chevrolet Full-Size
$29.99
|
![](images/PartsForSale/ACandHeating/ACBoxes/VENT_TUBE_MOUNT_GM-FBody(3013475)_small.jpg)
BLOWER MOTOR VENT TUBE CONNECTOR
1965-72 Chevrolet Full-Size
$9.99
|
|
![](images/PartsForSale/ACandHeating/ACBoxes/SWITCH_AmbientSensor69+_small.jpg)
AMBIENT SENSOR SWITCH - Good Original
1965-68 Chevrolet Full-Size
$55.00
(Good Original) |
![](images/PartsForSale/ACandHeating/ACBoxes/GMBlowerMotor_small.jpg)
BLOWER MOTOR - New
1962-72 Chevrolet Full-Size
$49.99
|
![](images/PartsForSale/ACandHeating/ACBoxes/BLOWER_WHEEL_Plastic_275inch(double-flat)_small.jpg)
BLOWER WHEEL
1962-72 Chevrolet Full-Size
$29.99 USED
(Plastic - 2 3/4" deep, for dual slot blower motor
shafts) |
![](images/PartsForSale/ACandHeating/ACBoxes/BLOWER_WHEEL_GMMetal_small.jpg)
BLOWER WHEEL - METAL
1962-72 Chevrolet Full-Size
$29.99 USED
(METAL - 2 3/4" deep, for single slot blower motor
shafts)
(GM # 3144683) |
|