The Part Guy - Olds Cutlass, 442 & F-85 A/C & Heater Controls & Parts







Home, About, Contact, Terms  CONTACT US

PRICES AND AVAILABILITY OF USED & REFURBISHED PARTS ARE SUBJECT TO CHANGE AT ANY TIME

Connect with us on:
 

CHEVY/GMC TRUCK

JUMP MENU:
CHEVY PICK-UP - 1964-66, 1967-72, 1973-75, 1976-81, 1982-84, 1985-87, 95-99

1964-66 Chevy/GMC Truck

RESTORATION INCLUDES:
(unless otherwise noted)

  • NEW evaporator.

  • NEW or RECONDITIONED ORIGINAL expansion valve.

  • RESTORED bead-blasted and painted evaporator housing.

  • RECONDITIONED Blower wheel, blower motor vent tube & vent tube mount. 

  • NEW blower resistor.

  • Varous clamps.

    •
1964-66 Chevy/GMC Truck

PLEASE NOTE - Extremely limited availability of this unit.


$1,599 plus s/h

WANT US TO CUSTOM REBUILD YOUR EVAPORATOR UNIT?

$999.99 labor + s/h.
Includes new evaporator, blower motor, resistor & blower motor.
*** Any additional parts & fibergalass repairs, if needed, are additional. 

1967-72 Chevy Truck, Suburban & Blazer
1967-72 GMC Truck
 PLEASE NOTE - There is a very limited availability of these units and most are built to order.

RESTORATION INCLUDES:
(unless otherwise noted)

  • NEW evaporator.

  • NEW standard 134a POA eliminator/upgrade valve or billet R12/134a POA eliminator valve.
    Can upgrade to stock rebuilt POA valve for an additional $175.

  • NEW replacement expansion valve.

  • Restored finish on inner and outer evaporator housing.  (Most housings have had some minor repairs.)
      NOTE - Does not include the suction fitting, liquid fitting or temperature cable clamps.

  • Blower wheel, blower motor vent tube & vent tube mount. 

  • NEW blower motor.

  • POA, expansion valve & evaporator clamps.

    •

  • NEW Drain tube & clamp.

LIMITED AVAILABILITY

$1,399 plus s/h +
 w/NEW EVAPORATOR w/BILLET POA ELIMINATOR/UPGRADE VALVE

LIMITED AVAILABILITY


$1,175 plus s/h +
 w/NEW EVAPORATOR w/134a POA ELIMINATOR/UPGRADE VALVE

WANT US TO CUSTOM REBUILD YOUR EVAPORATOR UNIT?

$700 labor + s/h.
Includes new evaporator, blower motor, expansion valve, drain-hose and POA Eliminator/Upgrade Valve***
*** Any additional parts & fibergalass repairs, if needed, are additional. 
NOTE - Cannot replace metal shroud on the rear of the unit, but may be able to repair with fiberglass.
UPRADES - $125 to upgrade to BILLET POA ELIMINATOR/UPGRADE VALVE. 
WE DO NOT CURRENTLY OFFER SERVICES ON THE ORIGINAL POA VALVES.


BLOWER MOTOR VENT TUBE
 1967-72
 $69.99


BLOWER MOTOR VENT TUBE CONNECTOR
 1967-72
 $9.99


DRAIN HOSE - New
 1967-72
 $29.99


BLOWER MOTOR - New
 1967-72
 $49.99


BLOWER WHEEL - METAL
 1967-72
$29.99 USED
 (METAL - 2 3/4" deep, for single slot blower motor shafts)
 (GM # 3144683)
BLOWER WHEEL
 1967-72
$29.99 USED
 (Plastic - 2 3/4" deep, for dual slot blower motor shafts)

1973-75 Chevy/GMC Truck
 RESTORATION INCLUDES:
(unless otherwise noted)

  • NEW Evaporator

  • NEW Accumulator

  • NEW Blower Motor

  • NEW Blower Resistor

  • NEW Orifice Tube

  • Restored finish on inner and outer evaporator housing! (Painted black.)

  • Blower motor vent tube.

LIMITED AVAILABILITY
 1973-75 Chevy/GMC Square Body Truck (C & K series)
$499.99 plus a $200 core charge *** & s/h.
CLICK ON IMAGES FOR LARGER & ADDITIONAL VIEWS!

*** Depending upon condition of your original unit, it may have a core value of up to $200 shipped to us in Tampa, FL.
NOT THE ENTIRE UNIT IS NEEDED.  PLEASE SEE PHOTO BELOW FOR PARTS THAT THE CORE CHARGE CONSISTS OF.

WANT US TO CUSTOM REBUILD YOUR EVAPORATOR UNIT?

$499.99 labor + s/h.
Includes new evaporator, blower motor, orifice tube & accumulator.***
*** Any additional parts & fibergalass/plastic case repairs, if needed, are additional. 


BLOWER MOTOR
1973-75
$49.99  NEW

 
BLOWER WHEEL
 1973-75
 $29.99 USED
 (Plastic - 3 5/8" deep)
NOTE - Requires blower wheel spacer.  If you don't have your original, this will need to be purchased separately.

1973-75 Chevy/GMC Truck & 1976-91 GM SUV
 EVAPORATOR FITTINGS SUPPORT BRACKET
$100 USED (Either painted or Zinc-Plated)
1973-85 Chevy/GMC Truck & 1976-91 GM SUV
 EVAPORATOR FITTINGS SUPPORT BRACKET PLATE
$50 USED/Zinc-Plated


BLOWER WHEEL SPACER
 w/Plastic Blower Wheel & Double-Slotted Blower Motor Shaft
$14.99 USED

 


BLOWER RESISTOR
All Square Body
 $19.99  NEW

1973-85 Chevy/GMC Truck & 1976-91 GM SUV
OUTBOARD CASE HALF SHROUD PLATE
$50 USED/Zinc-Plated		  
   

1976-81 Square Body Chevy/GMC Truck
 RESTORATION INCLUDES:
(unless otherwise noted)

  • NEW Evaporator

  • NEW Accumulator

  • NEW Blower Motor

  • NEW Blower Resistor

  • NEW Orifice Tube

  • Restored finish on inner and outer evaporator housing! (Painted black.)

  • Blower motor vent tube.

LIMITED AVAILABILITY
 1976-81 Square Body Che/GMC/GMC Square Body Truck (C & K series)
$425 plus a $200 core charge *** & s/h.
 CLICK ON IMAGES FOR LARGER & ADDITIONAL VIEWS!
*** Depending upon condition of your original unit, it may have a core value of up to $200 shipped to us in Tampa, FL.
NOT THE ENTIRE UNIT IS NEEDED.  PLEASE SEE PHOTO BELOW FOR PARTS THAT THE CORE CHARGE CONSISTS OF.

WANT US TO CUSTOM REBUILD YOUR EVAPORATOR UNIT?

$425 labor + s/h.
Includes new evaporator, blower motor, orifice tube & accumulator.***
*** Any additional parts & fibergalass/plastic case repairs, if needed, are additional. 

PICTURE
COMING
SOON
 A/C EVAPORATOR HOUSING
BLACK FINISH
1976-87
 $300 plus s/h.
RARELY AVAILABLE

 


INBOARD (Engine-Side) A/C EVAPORATOR HOUSING
BLACK FINISH
1976-87
 $175 plus s/h.
Fitting Support Bracket Not Included.
RARELY AVAILABLE

 

 


OUTBOARD (Fender-Side) A/C EVAPORATOR HOUSING
 PLASTIC - BLACK FINISH
NOTE - Some earlier years were made out of fiberglass, but
they interchange the same.
1976-87
(Part #3054314)
 $150 plus s/h.
RARELY AVAILABLE
   

1976-85 Chevy/GMC Truck & 1976-91 GM SUV
EVAPORATOR FITTINGS SUPPORT BRACKET (Type-1)
$50 USED/Zinc-Plated
1976-85 Chevy/GMC Truck & 1976-91 GM SUV
 EVAPORATOR FITTINGS SUPPORT BRACKET(Type-2)
$50 USED/Zinc-Plated

1976-85 Chevy/GMC Truck & 1976-91 GM SUV
 EVAPORATOR FITTINGS SUPPORT BRACKET (Type-3)
$50 USED/Zinc-Plated
1973-85 Chevy/GMC Truck & 1976-91 GM SUV
 EVAPORATOR FITTINGS SUPPORT BRACKET PLATE
$50 USED/Zinc-Plated
   


BLOWER MOTOR & WHEEL ASSEMBLY
1976-87
 $69.99  NEW


BLOWER RESISTOR
All Square Body
 $19.99  NEW


1973-85 Chevy/GMC Truck & 1976-91 GM SUV
OUTBOARD CASE HALF SHROUD PLATE
$50 USED/Zinc-Plated


1982-84 Square Body Chevy/GMC Truck
 RESTORATION INCLUDES:
(unless otherwise noted)

  • NEW Evaporator

  • NEW Accumulator

  • NEW Blower Motor

  • NEW Blower Resistor

  • NEW Orifice Tube

  • Restored finish on inner and outer evaporator housing! (Painted black.)

  • Blower motor vent tube.

LIMITED AVAILABILITY
 1982-84 Square Body Che/GMC/GMC Square Body Truck (C & K series)
$425 plus a $200 core charge *** & s/h.
 CLICK ON IMAGES FOR LARGER & ADDITIONAL VIEWS!

 
*** Depending upon condition of your original unit, it may have a core value of up to $200 shipped to us in Tampa, FL.
NOT THE ENTIRE UNIT IS NEEDED.  PLEASE SEE PHOTO BELOW FOR PARTS THAT THE CORE CHARGE CONSISTS OF.

WANT US TO CUSTOM REBUILD YOUR EVAPORATOR UNIT?

$425 labor + s/h.
Includes new evaporator, blower motor, orifice tube & accumulator.***
*** Any additional parts & fibergalass/plastic case repairs, if needed, are additional. 

 


INBOARD (Engine-Side) A/C EVAPORATOR HOUSING
BLACK FINISH
1976-87
 $175 plus s/h.
Fitting Support Bracket Not Included.
RARELY AVAILABLE

 

 


OUTBOARD (Fender-Side) A/C EVAPORATOR HOUSING
 PLASTIC - BLACK FINISH
NOTE - Some earlier years were made out of fiberglass, but
they interchange the same.
1976-87
(Part #3054314)
 $150 plus s/h.
RARELY AVAILABLE


BLOWER MOTOR & WHEEL ASSEMBLY
1976-87
 $69.99  NEW


BLOWER RESISTOR
All Square Body
 $19.99  NEW


1973-85 Chevy/GMC Truck & 1976-91 GM SUV
OUTBOARD CASE HALF SHROUD PLATE
$50 USED/Zinc-Plated


1985-87 Square Body Chevy/GMC Truck
 RESTORATION INCLUDES:
(unless otherwise noted)

  • NEW Evaporator

  • NEW Accumulator

  • NEW Blower Motor

  • NEW Blower Resistor

  • NEW Orifice Tube

  • NEW Heater Core

  • NEW Drain Hose

  • NEW Actuators (2)

  • Restored finish on inner and outer evaporator housing

  • Good Original Blower Motor Vent Tube
   
   

LIMITED AVAILABILITY
 1985-87 Square Body Chevy/GMC Square Body Truck (C & K series)
$425 plus a $200 core charge *** & s/h.
 CLICK ON IMAGES FOR LARGER & ADDITIONAL VIEWS!

*** Depending upon condition of your original unit, it may have a core value of up to $200 shipped to us in Tampa, FL.
NOT THE ENTIRE UNIT IS NEEDED.  PLEASE SEE PHOTO BELOW FOR PARTS THAT THE CORE CHARGE CONSISTS OF.

WANT US TO CUSTOM REBUILD YOUR EVAPORATOR UNIT?

$375 labor + s/h.
Includes new evaporator, blower motor, orifice tube & accumulator.***
*** Any additional parts & fibergalass/plastic case repairs, if needed, are additional. 

PICTURE
COMING
SOON
 A/C EVAPORATOR HOUSING
BLACK FINISH
1976-87
 $300 plus s/h.

 


INBOARD (Engine-Side) A/C EVAPORATOR HOUSING
BLACK FINISH
1976-87
 $175 plus s/h.
Fitting Support Bracket Not Included.
RARELY AVAILABLE

 

 


OUTBOARD (Fender-Side) A/C EVAPORATOR HOUSING
 PLASTIC - BLACK FINISH
NOTE - Some earlier years were made out of fiberglass, but
they interchange the same.
1976-87
(Part #3054314)
 $150 plus s/h.
RARELY AVAILABLE


BLOWER MOTOR & WHEEL ASSEMBLY
1976-87
 $69.99  NEW


BLOWER RESISTOR
All Square Body
 $19.99  NEW


1973-85 Chevy/GMC Truck & 1976-91 GM SUV
OUTBOARD CASE HALF SHROUD PLATE
$50 USED/Zinc-Plated


1995-99 Chevy/GMC Truck
 RESTORATION INCLUDES:
(unless otherwise noted)

  • NEW Evaporator

  • NEW Blower Motor

  • NEW Blower Resistor

  • NEW Orifice Tube

  • NEW Blower Motor

  • Restored finish on inner and outer evaporator housing! (Painted black.)

  • Blower motor vent tube.

WANT US TO CUSTOM REBUILD YOUR EVAPORATOR/HEATER PLENUM UNIT?

$450 labor + s/h.
Includes new evaporator, heater core, blower motor, orifice tube, resistor & actuators. ***
*** Any additional parts & plastic case repairs, if needed, are additional. 

   

 

 


ALL USED, REBUILT & RECONDITIONED PRODUCTS HAVE LIMITED AVAILABILITY &
NOT ALL PRODUCTS PICTURED ARE AVAILABLE
ALL INVENTORY IS SUBJECT TO AVAILABILITY & PRICES ARE SUBJECT TO CHANGE AT ANY TIME.

Questions or Stock Requests
CONTACT AVAILABLE BY EMAIL ONLY
OR EMAIL THEPARTG@THEPARTGUY.COM

Ordering Information
CONTACT AVAILABLE BY EMAIL ONLY
OR EMAIL THEPARTG@THEPARTGUY.COM


Post a picture of your car!
American made,
whenever possible!